Diaphragm
Pressure Gauges Models PSCh / PSChG / PSK / PSKG |
Download:* |
Model |
PSCh
PSChG |
Diaphragm gauges with horizontal
diaphragm suit for low pressure ranges.With open flange connection the diaphragm pressure
gauges can be supplied in suitable versions for all kinds of media, even aggressive,
contaminating or viscid media. |
|
|
This gauges are 5
times overrange protected, but max. up to 40 bar (600 psi). |
|
Model PSCh / PSChG
is suitable where high safety standards are required, e.g. for oxygen service acc. to EN
837-2. |
| The highly chemical
resistant stainless steel case is provided with a solid front between measuring system and
dial and a full blow-out safety back, similar to S3 of EN 837-1. |
PSCh: |
dry version |
| PSChG: |
with glycerine
filling |
|
Case Size: |
100 mm (4")
160 mm (6") |
|
Case: |
304 stainless steel,
with solid front and full blow-out safety back 304 stainless steel,
safety features similar to EN 837-1, S3 |
| Ring: |
bayonet
ring 304 stainless steel |
|
|
Pressure Ranges: |
0-10 mbar - 0-40 bar or
0-4"WC - 0-600 psi
(also vacuum or compound ranges) |
|
Accuracy: |
±
1.6 % f.s. |
|
Process Connection: |
bottom connection
½" BSP, ½" NPT, M 20 x 1,5 or
open flanges according to DIN EN or ASME |
|
Wetted
Parts: |
lower
flange:
stainless steel,
zinc plated carbon steel / PTFE (accuracy 2.5%) or
stainless steel / PTFE(accuracy 2.5%);
diaphragm:
stainless steel or duratherm |
|
Details and Special
Configurations: |
see general information leaflet
3000 and data sheet 3600;
electrical accessories see data sheet 3690 |
|
|
Model |
PSK
PSKG |
Another
safety version with all safety standards similar to S3 of EN 837-1, but with a rugged and
rust resistant polyamide 6B screw ring case, is our model PSK / PSKG. This version is only
available in nominal size 100 (4"). |
|
PSK: |
dry version
|
|
PSKG: |
with
glycerine filling |
Case Sizes: |
100 mm (4") |
| Case: |
glass
fiber reinforced polyamide, black,
with solid front (304 stainless steel / 1.4301) and a polyamide blow-out safety back with
retain straps,
safety features similar to EN 837-1, S3 |
|
Ring: |
screw
ring glass fiber reinforced polyamide 6 B, black |
|
Pressure Ranges: |
0-10 mbar - 0-40 bar or
0-4"WC - 0-600 psi
(also vacuum or compound ranges) |
|
Accuracy: |
±
1.6 %
f.s. |
|
Process Connection: |
bottom connection
½" BSP, ½" NPT, M 20 x 1,5 or
open flanges according to DIN EN or ASME |
|
Wetted
Parts: |
lower
flange:
zinc plated carbon steel,
stainless steel,
zinc plated carbon steel / PTFE (accuracy 2.5%) or
stainless steel / PTFE(accuracy 2.5%);
diaphragm:
zinc plated carbon steel, stainless steel or duratherm |
|
Details and Special
Configurations: |
see general information leaflet
3000 and data sheet 3400 |
|
|
|
